Table of Contents
Advertisement
Telephone base overview
IN USE light
Flashes when there is an
incoming call, or another
telephone sharing the
same line is in use.
On when the handset is
in use, or the answering
system is answering a call.
/FIND HANDSET
Press once and then
release to page all system
handsets.
1/
2 lights
On when the telephone base is paired and
connected with a Bluetooth device.
Flashes when there is an incoming cell call.
Alternate when the telephone base is in
discoverable mode.
X/DELETE
Delete the playing message.
Press twice to delete
all previously reviewed
messages when the phone
is not in use.
/REPEAT
Press to repeat a message
or press twice to play the
previous message.
Using the handset menu
Press MENU when the phone is not in use.
.
2.
Press
or
Press SELECT to enter that menu.
3.
To return to the previous menu, press CANCEL.
•
To return to idle mode, press and hold CANCEL.
•
Bluetooth
To use a Bluetooth enabled cell phone with your DS6521, you must first pair and
connect your Bluetooth device(s) with the telephone base. All DS6521 handsets
can be used to make or answer calls on the cell phone line.
Bluetooth wireless technology operates within a short range (a maximum of
approximately 30 feet). When you pair a Bluetooth cell phone or Bluetooth headset
to the telephone base, make sure your Bluetooth device is close to the telephone
base to maintain sufficient signal strength.
Pair and connect your first Bluetooth cell phone
.
Press and hold
light turns on.
2.
Turn on the Bluetooth feature of your cell phone. Once your cell phone finds
your VTech phone, press the appropriate key on your cell phone to continue the
pairing process.
Enter the PIN of the telephone base into your cell phone. The PIN number is 0000.
3.
Download directory
.
Press MENU when the phone is not in use.
Scroll to Bluetooth then press SELECT.
2.
Scroll to Download dir then press SELECT.
3.
Scroll to select the desired cell phone, then press SELECT.
4.
until the screen displays the desired feature menu.
1/
2 on the telephone base for four seconds. The
Message window
Shows the number of
messages and other
answering system information.
Turn the answering system
on or off.
4
/VOL and
/VOL
Adjust the volume during
message playback.
Adjust the telephone
base ringer volume when
the phone is not in use.
/ANS ON/OFF
/PLAY/STOP
Play or stop playing
messages.
/SKIP
Skip to the next message.
1/
2
Press once to connect to
cell device in slot.
Press and hold to add
device to or replace device
in slot.
1/
2
Advertisement
Table of Contents
