VTech DS6511 Quick Start Manual

Bluetooth quick start guide
DS6511/DS6511-15/DS6511-16/
DS6511-2/DS6511-3/DS6511-4A
Bluetooth setup
To use a Bluetooth enabled cell phone with your DS6511,
you must first pair and connect your Bluetooth cell phone(s)
with the telephone base. All DS6511 handsets can be used to
make or answer calls on the cell line.
Bluetooth wireless technology operates within a short
range (a maximum of approximately 30 feet). When
you pair a Bluetooth cell phone to the telephone base,
place your Bluetooth cell phone closer to the telephone
base to maintain sufficient signal strength. For optimal
performance, keep your cell phone within 15 feet of the
telephone base while using the cell line.
• Refer to your user's manual for complete
feature instructions.
• The pairing process may take up to one minute.
If the pairing process fails, try again.
Pair and connect your first Bluetooth
cell phone
i
Before you begin, make sure you have cellular
coverage and your Bluetooth enabled cell phone
is not connected to any other Bluetooth device.
1. Press and hold 1 or 2 on the
telephone base for about
four seconds. The 1 or 2
light blinks.
2. Turn on the Bluetooth feature
of your cell phone. Once your
cell phone finds your VTech
phone (VTech DS6511), press
the appropriate key on your cell
phone to continue the pairing process.
• Your cell phone may prompt you to enter the PIN of the
telephone base. The default PIN of the telephone base
is 0000.
3. When the cell phone is connected to
the telephone base, the corresponding
status icon ( 1 or ) displays and the
2
corresponding device light ( 1 or
turns on.
If you have trouble pairing your cell phone, it may not
be compatible with your DS6511. Check the Bluetooth
compatibility list at www.vtechphones.com.
• The pairing process may take up to one minute. If the
pairing process fails, try again.
• The steps for the pairing process may vary for different
cell phones. If this happens, follow the prompts on
your cell phone and your DS6511 to complete the
pairing process.
Download directory
You can download up to 200 directory entries to your DS6511
via Bluetooth wireless technology.
• Place your cell phone next to the telephone base when
you download a cell phone directory to your DS6511.
• Make sure the cell phone is paired to your DS6511, on
the device list and connected to the base before you
download a cell phone directory.
• For certain cell phones, you may need to press a key on
your cell phone to confirm the directory download.
1. Press MENU.
2. Press or to highlight Bluetooth
and then press SELECT.
3. Press
Download dir
4. The screen displays Select a device for
a few seconds. Press
the desired device (if necessary), then
press SELECT.
HANDSET 1
5. The screen flashes Downloading...
During the download process, the
handset displays the progress. All
1
ECO
2) other idle system handsets display
2
10:01
AM 01/02 Downloading...
When the downloading process
completes, the handset displays
Entries added: XXX for a few seconds
and then returns to the Bluetooth menu.
The Bluetooth
SIG, Inc. and any use of such marks by VTech Holdings Limited
is under license. VTech Holdings Limited is a member of
Bluetooth
Bluetooth SIG, Inc. Other trademarks and trade names are those
of their respective owners.
ECO 1
2
Copyright © 2012 for VTECH TELECOMMUNICATIONS LTD.
All rights reserved. Printed in China.
or to highlight
Download dir
and then press SELECT.
ECO
Select a device
or to choose
ECO
D1:Cel l Phone A
ECO
Downloading...
ECO
Entries added:
ECO
®
word mark and logos are owned by Bluetooth
96-008568-050-100
1
2
1
2
1
2
8
1
2
118
1
2