Advertisement
NetVision quick start call basics
A handset user guide is supplied with each Symbol
how to use the buttons on the handset, including any data-related buttons found on the NetVision
Data phone. The buttons described here are for the NetVision Model #: NP-4046-300 handset.
Logging into and out of the network
Logging in:
Press
to turn the handset on.
Enter your PIN number, and press
Quick start hints
You must be logged into the network:
Make call: Enter number and press
End call or feature: Press
To Hold or Unhold a call, or to toggle
between two calls: Press
To Hold the call and drop the link so someone
else can pick it up, press
To recover a held call from a dropped link,
press:
Active handset display
The handset display shown below is from the Model #: NP-4046-300 NetVision handset. If you have
a NetVision data telephone or an older version of the handset, the shape of the display may have a
different appearance, and the icons may be slightly different, however, the information is the same:
Radio signal strength indicator
.
.
.
.
.
.
®
NetVision handset which describes, in detail,
Logging out:
Press and hold
Answer Call: Press
If you pressed
retrieve the call, press
choose
Off-hook, if it is programmed into
the menu.
Note: This sequence also produces a dial tone
on an idle telephone.
User Login
Name
to turn the handset off.
.
to silence a ringing call, to
or
Battery strength indicator
Call information
Page 3
Advertisement
