Operating In Water Or Mud - Hitachi EX27U Operator's Manual

OPERATING IN WATER OR MUD

IMPORTANT: Avoid submerging the swing bearing,
swing gears and center joint in water or
mud. If these parts are submerged in
water or mud, be sure to clean them and
reapply grease as soon as possible, else
damage may occur. Also consult your
authorized dealer for instructions.
1. If the footing is even and the water slow running, the
machine can operate in water up to the upper track
shoe surface (A).
2. When operating in such conditions, check the ma-
chine's position often. Reposition the machine if nec-
essary.
EX27u
EX35u
EX50u
DRIVING THE MACHINE
A
470 mm (1ft 7in)
470 mm (1ft 7in)
535 mm (1ft 9in)
4-6
A
M586-05-005