Operating In Water Or Mud - Hitachi ZAXIS 120-6 class Operator's Manual

Operating in Water or Mud

The machine can be operated in water up to the upper edge
of the upper rollers only if water is flowing slowly, and the
worksite ground is firm enough to prevent the machine from
sinking past the upper edge of the upper roller.
Frequently check the position of the machine when working in
such conditions. Reposition the machine if necessary.
Avoid submerging the swing bearing, swing gears and center
joint.
If the swing bearing, swing internal gear and center joint are
submerged, remove the drain plug to drain mud and water.
Clean swing area. Install plug. Lubricate swing internal gear
and swing bearing.
Swing Internal Gear Capacity
ZX120-6 class
ZX160-6, 200-6, 240-6,
300-6 class
ZX330-6 class
Lubricate swing internal gear.
DRIVING THE MACHINE
: 9 L
: 17 L
: 19 L
Model
ZX120-6 class
ZX160-6, 200-6, 240-6 class
ZX300-6, 330-6 class
4-6
A
M104-05-009
A
660 mm
770 mm
860 mm