Redarc SBI12KIT Manual
12v dual battery isolator & wire kit
Hide thumbs
Also See for SBI12KIT:
- Install manual (16 pages) ,
- Manual (4 pages) ,
- Quick start manual (4 pages)
Advertisement
KIT CONTENTS
1.
200mm Battery Positive
cable (red)
2.
1800mm Battery Positive
cable (red)
3.
Fuses (60A)
4.
Fuse holders (incl.
mounting nuts)
5.
Battery Terminals
6.
Isolator Terminal
protectors
7.
SBI12 Battery Isolator
8.
750mm Auxiliary battery
ground cable (black)
9.
Battery terminal protector
for Auxiliary Battery
Positive Terminal.
WIRING INSTRUCTIONS
1
* REMOVE MAIN BATTERY EARTH *
2
Place fuses in fuse holders and attach red cables as shown in diagram A.
12V Dual Battery Isolator & Wire Kit
SBI12KIT
FUNCTION
The Smart Start
x2
number SBI12KIT) comes with everything required to install
your Smart Start
x2
®
Start
Perfectly suited to the Do-It-Yourself installer, the SBI12KIT
x2
requires no crimping or soldering, it's just plug and play.
x2
The SBI12KIT features high quality MTA 60 Amp fuses and
fuse holders with the corresponding ring terminals already
x2
attached to the wires.
x2
x1
x1
6
x1
Please refer to the Smart Start
Numbers refer to
the contents list
1
®
Dual Battery Isolator & Wire Kit (part
®
Dual Battery Isolator, including the Smart
itself.
1
9
7
4
2
3
4
5
2
3
®
SBI Manual for more info.
8
Advertisement
Table of Contents
Related Manuals for Redarc SBI12KIT
Summary of Contents for Redarc SBI12KIT
- Page 1 Fuses (60A) requires no crimping or soldering, it’s just plug and play. Fuse holders (incl. mounting nuts) The SBI12KIT features high quality MTA 60 Amp fuses and fuse holders with the corresponding ring terminals already Battery Terminals attached to the wires.
- Page 2 Insert the crimped ends of the Battery Positive cables into the isolator terminal protectors provided as per diagrams E, F & G. Mount the SBI unit in a convenient location, as shown in diagram K. Redarc recommends connecting the SBI as close as possible to the start battery.
- Page 3 WIRING INSTRUCTIONS * MOUNT THE SBI12 * * ATTACH THE EARTH WIRE * Ensure ground point makes a Nuts, Bolts and good electrical Mounting Plate connection to not provided. the negative terminal of both batteries. Wire the SBI12 as shown in diagrams M,N & O. Ensure that all connections are tight and that the provided spring washers are used.
Need help?
Do you have a question about the SBI12KIT and is the answer not in the manual?
Questions and answers