Redarc 100A MEGA Fuse Kit Quick Start Manual

Download this manual

100A MEGA Fuse Kit

FK100

This manual contains assembly and wiring instructions for components

in this kit only. For complete installation instructions for individual

devices shown in the wiring diagrams, refer to the Instruction Manual

supplied with each device.

Need help?

Do you have a question about the 100A MEGA Fuse Kit and is the answer not in the manual?

Page 1 100A MEGA Fuse Kit FK100 This manual contains assembly and wiring instructions for components in this kit only. For complete installation instructions for individual devices shown in the wiring diagrams, refer to the Instruction Manual supplied with each device.
Page 2: Kit Contents
100A MEGA FUSE KIT The FK100 is designed to provide a simple, neat fuse installation for dual battery systems. The FK100 is perfect for the Smart Start SBI (SBI12 and SBI24) auxiliary ® and start battery connection with a push button override installed; and the BMS12075 auxiliary battery connection.
Page 3: Limited Warranty
Ozparts Sp. z o. o. Sp. kom., Slowackiego 32/5, 87−100 Torun, Poland For written request please email power@redarcelectronics.eu Design and specifications are subject to change without notice. Copyright © 2024 REDARC Electronics Pty Ltd. All rights reserved. REDARC®, THE POWER OF REDARC® and Smart Start® are trademarks of REDARC Electronics Pty Ltd.
Page 4 LUG AND HEATSHRINK ASSEMBLY FUSE KIT ASSEMBLY Order of installing Bolt in the Fuse Holder: Strip the end of the cable back enough 1. MEGA Fuse to ensure the insulation does not enter the barrel of the Lug when fully inserted. 2.
Page 5 Tech Support 1300 REDARC Head Office +61 8 8322 4848 New Zealand +64 9 222 1024 UK & Europe +44 (0)20 3930 8109 +1 (704) 247 5150 Canada +1 (604) 260 5512 Mexico +52 (558) 526-2898 redarcelectronics.com WARFK100-4 EN...

Fk100