Setting The Clock; Setting The Timer; Childproof Lock; Oven - Bosch HBN231 0SA Series Instruction Manual

Table of Contents

Advertisement

Use the + button to set a later end time.
6.
The setting is adopted after a few seconds.
The display shows the end time until the oven starts
operating.

Setting the clock

When the appliance is connected for the first time or after a
power cut, the
symbol and three zeros flash in the display.
0
Set the clock. The function selector must be switched off.
Setting procedure
Press the
Clock button.
0
1.
12.00 appears in the display and the
Use the + or - button to change the clock.
2.
After a few seconds, the time is saved. The
out.

Setting the timer

You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has a special signal. This means that you
can tell whether the timer duration or the cooking time has
elapsed. You can also set the timer if the childproof lock is
active.
Setting procedure
Press the
Timer button.
S
1.
The
symbol flashes.
S
Use the - or + button to change the timer duration.
2.
Default value for + button = 10 minutes
Default value for - button = 5 minutes
The timer starts after a few seconds. The
the display. You will see the time counting down.
When the time has elapsed
A signal sounds. Press the

Childproof lock

Oven

The oven has a childproof lock to prevent children switching it
on accidentally.
Switching the childproof lock on and off
The function selector must be switched off.
To switch on: press and hold the
symbol appears in the display. This takes about 4 seconds.
To switch off: press and hold the
symbol goes out.
symbol flashes.
0
symbol goes
0
symbol lights up in
S
Timer button. The timer goes out.
S
key button until the
C
C
key button until the
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.
Note: You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.
Changing from summer to winter time, for example
Press the
Clock button twice and change the time using the
0
+ or - button.
Changing the timer duration
Press the
S
Timer button. Use the + or - button to change the
time.
Cancelling the setting
Press the
Timer button. Press the - button until zero is shown
S
on the display.
The timer and cooking time count down at the same time
Both symbols light up. You can see the timer duration counting
down in the display.
To call up the
x
clock:
Press the
0
Clock button repeatedly until the relevant symbol
appears.
The value you are checking appears for several seconds on the
display.
Notes
You can set the timer and clock at any time.
If the childproof lock is active, it will be cancelled following a
power cut.
C
C
remaining cooking time,
y
button
0
end time or
0
9

Advertisement

Table of Contents
loading

Table of Contents