Preparation / Function Check - barbas UNIVERSAL-6 85 Installation Instructions & Manual For Annual Maintenance

UNIVERSAL-6 85
Air supply through the rear
Reconnect the air supply to the appliance.
Take the connection module for the back connection and hit the jaw plate out with a
hammer. Place a collar in the opening that has been created. Tighten the collar and
bend the 3 fl anges outwards.
Fit the connection module onto the back of the appliance. The appliance is now
prepared for air supply from the outside.
3.5

PREPARATION / FUNCTION CHECK

• Check the operation of
• Check if the combustion air supply
• Check if the convection
• Check if the convection
• Check that the fan, once fi tted, is in working order (if present)
Installation instructions
the combustion air supply slider
openings are open
air supply openings are open
air escape openings are open
39