ResMed S9 AutoSet Information Manual page 6

Electromagnetic compatibility
Aircraft use
IEC 60601-1 classification
Notes:
•
The manufacturer reserves the right to change these specifications without notice.
•
The temperature and relative humidity settings displayed for ClimateLine or ClimateLine
measured values.
•
Check with your clinician/service provider before using the SlimLine air tubing with devices other
than the S9.
Pneumatic flow path
S9 AutoSet/S9 Elite
Inlet filter
6
Product complies with all applicable electromagnetic
compatibility requirements (EMC) according to
IEC60601-1-2, for residential, commercial, and light industry
environments.
It is recommended that mobile communication devices are
kept at least 1 m away from the device.
Information regarding the electromagnetic emissions and
immunity of these ResMed devices can be found on
www.resmed.com, on the Products page under Service
and Support. Click on the PDF file for your language.
ResMed confirms that the S9 AutoSet/Elite meets the
Federal Aviation Administration (FAA) requirements (RTCA/
DO-160, section 21, category M) for all phases of air travel.
This applies to frequencies up to 400Hz nominal.
Class II (double insulation), Type BF
H5i
Blower
Tube
Mask
MAX
are not