On-Screen Error Messages - Sharp BD-HP90S Operation Manual

On-screen Error Messages

The following messages appear on the TV screen in case of an error during operation.
Error message
Cannot play.
Incompatible disc.
Cannot operate.
This USB memory is not formatted
properly. Please format the memory in
USB memory management.
The Connected USB Memory cannot
be used. It should be compliant with
USB 2.0
56
Possible Error
• The disc cannot be played back with
this Player.
• If you load a disc which cannot be
played with this Player (i.e. a scratched
disc), or if you load a disc upside down,
this message will appear, and the disc
will automatically pop out.
• Occurs if the loaded disc cannot be
played because it is a non-standard disc
or scratched, etc.
• Occurs if an operation is incorrect.
• Occurs if there is a formatting error.
• Occurs if the USB memory is not
formatted with FAT 32/16.
• Occurs if USB memory not compliant
with USB 2.0 High Speed (480Mbit/s) is
used (i.e. USB 1.0/USB 1.1).
Suggested Solution
• Check the disc, and load it correctly.
• Remove the disc.
—
• Format the USB memory again.
• Format the USB memory with your
PC.
• Connect USB 2.0 High Speed
(480Mbit/s) compliant USB memory.