SETTINGS
12
Select "Next", then press ENTER.
13
For testing after confirming the settings, select
"Test", then press ENTER.
•
If the test has failed, an error message appears.
Retry to perform the settings after checking that the
connection (page 23) is performed properly.
Confirm your setting.
Access Point:
XXXXXXXXXXXX
Security key:
XXXXXXXXXXXX
14
Follow steps 6–11 of "When using a LAN Cable"
on page 45 to complete the network connection
settings.
Information on MAC addresses
A MAC address is a unique ID number for network
equipment. A MAC address is necessary for MAC
address filtering on the wireless router/access
point.
Before the wireless communication setup is
performed, we recommend writing down the MAC
address and keeping it in a safe place. (The MAC
address is displayed on the "Setting the info. of the
Ethernet" screen when wireless communication is
set (See step 5 of page 46).)
MAC address
Test
47