Player Setup Location; Removing And Replacing The Terminal Cover - Sharp BD-HP90S Operation Manual

Player setup location

Removing and replacing the
terminal cover
Before connecting the player to a TV, the AC adapter,
etc., remove the terminal cover on the bottom of the
player.
1
Remove the terminal cover on the bottom of the
player.
b Bottom side of the player
2
Make the necessary connections to the player
(pages 20–23, 25).
3
Replace the terminal cover.
E
Using the player in a horizontal position
Pass the cables through the centre of the
terminal cover.
b Bottom side of the player
Pass the cables through here.
Replace the terminal cover so the cables pass
through the centre of the cover.
b Bottom side of the player
18
Installation example
E
Using the player in a vertical position
Pass the cables through the end of the terminal
cover.
b Bottom side of the player
Pass the cables through here.
Replace the terminal cover so the cables pass
through the end of the cover.
• See page 19 to install the vertical stand.
Securing bracket for the HDMI cable
The terminal cover has a securing bracket to prevent
breakage of the HDMI cable. When the HDMI cable is
not passed straight through the securing bracket, the
terminal cover cannot be closed.
b Back of the terminal cover
Securing bracket for the HDMI cable
Installation example