Table of Contents
Advertisement
3-9 Handheld scan & some global settings
Scanning mode:
Good-read off-The trigger button must be pressed once to activate scanning. The scanner will stop
scanning when there is a successful reading or no code is decoded after the Stand-by duration
elapsed.
Momentary-The trigger button acts as a switch. Press button to activate scanning and release
button to stop scanning. The scanner will stop scanning when there is a successful reading or no
code is decoded after the Stand-by duration elapsed.
Alternate continue-The trigger button acts as a toggle switch. Press button to activate or stop
scanning.
Continue-The scanner always keeps scanning, and it does not matter when the trigger button is
pressed or duration is elapsed.
Timeout off-The trigger button must be pressed once to activate scanning. The scanner will stop
scanning when no code is successful decoded after the Stand-by duration elapsed.
Auto-detection- Good-read off – By setting Enable, the scanner will start operating if any nearby
object has been detected. The scanner will stop scanning when there is a successful reading or no
code is decoded after the Stand-by duration elapsed. Once the scanner stops scanning, the present
object must be removed to enable Auto-detection.
Auto-detection- Good-read on – By setting Enable, the scanner will start operating if any nearby
object has been detected. The scanner stops scanning when no code is successful decoded after the
Stand-by duration elapsed. Once the scanner stops scanning, the present object must be removed to
enable Auto-detection.
Working mode of Auto-detection:
In cradle- The scanner must be placed in the cradle to enable Auto-detection. When the scanner
is not in cradle, the Scan mode will be Momentary.
Always ON- Auto-detection is always enabled regardless of the placement of the scanner.
Note: This function is only valid when the Scan mode is Auto-detection.
Same barcode delay time: If a barcode has been scanned and output once successfully, the scan
operation should be interrupted for delay time or the focus of the scanner must be moved away from the
barcode beyond delay time to active scanning the same barcode. When this feature is set to be "0xFF",
then the delay time is indefinite.
Double confirm: If it is enabled, the scanner will require a several times of same-decoded-data to
confirm a valid reading.
Global Max./Min. code length for 1D symbol: These two lengths are defined as the valid range of
decoded 1D barcode data length. Make sure that the minimum length setting is no greater than the
maximum length setting, or otherwise the labels of the symbol will not be readable. In particular, the
same value can be set for both minimum and maximum reading length to force the fixed length barcode
decoded.
Same barcode delay time for 2D symbol: If a 2D barcode has been scanned and output once
successfully, the scanner must output the same barcode data beyond delay time. When this feature is
set to be "0xFF", then the delay time is indefinite.
Notes:
1. Please set the max./min. length for individual barcode in later sections, if special demand is
requested.
2. The number of check digits is included in max./min. code length.
3. These two settings have no effect on the symbols with fixed-length, e.g. UPC-A, UPC-E, EAN-13,
EAN-8 and China Post.
Global G1-G4 string selection: The scanner offer one or two string group for ALL symbols. By setting
one or two digits to indicate which string group you want to apply. You may refer to
& FN1 substitution string setting
Example: Group 1 → set 01 or 10. Group 2 and 4 → set 24 or 42.
All valid settings include 00, 01, 02, 03, 04, 05, 06, 10, 11, 12, 13, 14, 15, 16, 20, 21, 22, 23, 24, 25, 26,
30, 31, 32, 33, 34, 35, 36, 40, 41, 42, 43, 44, 45, 46, 50, 51, 52, 53, 54, 55, 56, 60, 61, 62, 63, 64, 65 and
66.
Element amendment: If it is enabled, the scanner can read the barcode comprised with bars and
spaces in different scale.
Character output restraint:
Printable character only- If this option is selected, the scanner will output the printable characters
only, i.e. in ASCII from 20H to 7EH.
and
3-45 G1-G4 string position & Code ID
29
3-44 G1-G4 & C1-C2
position.
Advertisement
Table of Contents
