Reset Latched Alarms; Setting System Date - Hills NX-1516 User Manual

RESET LATCHED ALARMS

Reset Latched Alarms function resets smoke detectors, zone troubles and zone tampers
alarms. Note: If the code pad begins beeping, the reset did not execute properly. Enter your
code to silence the code pad. Wait a few minutes and repeat the reset function to attempt
another reset. If the code pad still beeps after repeated attempts, please contact your
installer.
Key Sequence

SETTING SYSTEM DATE

Key Sequence
9
*
1 2
2
0 6
1 1
0
7
#
6
3 4
Page 15
Operation
1. Enter you code to silence the
code pad sounder.
2. Press [*] [7] to activate the reset
function.
Operation
Example shows setting date as
Monday, June 11, 2007.
1. Press [*] [9] [6] keys.
2. Enter the master code.
3. Enter the day of the week
(1=Sunday, 7=Saturday).
4. Enter the month code. Must be
two (2) digits. E.g. [0][6] for June.
5. Enter the day code. Must be two
(2) digits. E.g. [1][1] for the 11
6. Enter the last two (2) digits of the
year code. E.g. [0][7] for 2007.
7. Press [#] to exit. Your date is now
set.
th
day.
V2.02