Table of Contents
Advertisement
USER CODE AUTHORISATION
Any user code can be assigned the master code status to allow that user to change or add
other codes and provide access to other system functions.
Key Sequence
*
#
#
SETTING THE DOOR CHIME
Chime Mode provides only an audio warning at the premises. A ding-dong is sounded from
the code pad when the protected area is entered, for example, when an infant opens the
door.
The door chime is turned on or off by pressing the [CHIME] key while the system is in the
disarmed state. If the chime is on, the chime light will be lit. If the chime is off, the chime light
will be off. Each press of the [CHIME] key will toggle the chime feature on/off. Chime mode
must be programmed by your security Installation Company. Tell the installer if Chime mode
is required for any areas.
Key Sequence
Example shows enabling user two
[02] as a master code.
1. Press [*] [6].
2. Enter an existing master code.
3. Enter the user code to have
changed to a master code.
(e.g. User code 02)
4. Press [4] key. LED 4 will light up
to indicate the user is now a master
code. If LED 4 is not lit then it is a
normal user code.
5. Repeat steps 3 and 4 for
additional user codes.
6. Enter [*]
7. Enter [#][#] when completed.
Press the [CHIME] key to turn on or
turn off the chime feature.
Page 13
Operation
Operation
V2.02
Advertisement
Table of Contents
