Format Device; Factory Settings; Play Setting; Play Mode - Evistr L157 Manual

http://blog.evistr.com

2.7 Format Device

Format device, it will erase all data on the device, and cannot be restore forever
Notice:
Do not format the device unless you have already backup the data on the device to computer,

and you are sure about this.
Do not cut off its power during format the device, otherwise it will meet fatal error

During format device, wait till it show completed information, and the device reboot, and then

you could switch off the device.
If unfortunately, cut off device power, and see DISK ERROR, Here is the rescue:

Please kindly cut off the device POWER from ON to OFF position, and connect to
WINDOWS computer, format the disk again from computer, and then things will be normal. And
all data will be erased thoroughly.

2.8 Factory settings

Factory settings: it will restore to default settings. This could be very helpful, when set the
device wrong, and do not know how to correct it.
Enter to Factory Settings, screen will show
" Restore
Yes
No"
When select Yes, and press M(menu) to confirm the choice, so all settings will be restored to
default. Screen will show "Restored!"

3) Play Setting

3.1 Play Mode

Repeat:
Repeat off, Repeat One, Repeat All, View Playing
Repeat off: select and confirm this, it will play in normal, from first recording to the last one
Repeat One: select and confirm this, it will repeat on track again and again
Repeat All: select and confirm this, it will repeat from the first recordings to the last again and
again
View Playing: only play 10 seconds of each file and go to next
Shuffle:
When shuffle is on, it will playback all recordings or music in random, even you press FF/REW it
will not select to next or previous track, it will in random selection

3.2 Sound Setting

Sound Settings could adjust Equalizer (off, Rock, Pop, Soft, Jazz, Classical, Techno), Select and
confirm changes, it will becomes to effect.
EVISTR VOICE RECORDER
support-us@evistr.com
Page - 18 - of -25 -