Format Device; How To Connect To Computer - Evistr L157 Manual

http://blog.evistr.com
Press M (menu), confirm your selection, and it starts to restore to factory settings.
When it succeed, screen will show "restored!"
Menu Options
Folder View
Record Se...
System settin

12) Format Device

Format on the device directly
Here is the steps to format the recorder
Open your voice recorder
Press M (menu), find & select " System Setting"
Press M(menu), enter System Setting, find & select "Format Device"
Press M (menu), enter it, find & select "Yes"
Press M (menu), confirm your selection, and it starts to format
And everything on the recorder will be deleted, erased, and cannot be restored.
Screen will show "please wait", after format completed, the device will restore settings, and reboot.
Do not shut down the device, until this procedure completed
Menu Options
Folder View
Record Se...
System settin
Format finish,
reset...
WARNNING:
When format device, do not cut down the device power, unless formatting completed, and the
device could operate again
Backup all files you need before format the device, once format completed, all data will be erased
and cannot restore.

13) How to Connect to Computer

EVISTR VOICE RECORDER
Menu Options
Information
Format de...
Factory setti
System set
Information
Format Devic
Factory s...
No voice
EVISTR
Page - 12 - of -25 -
support-us@evistr.com
Restore
Yes
No
Format ?
Yes
No
recordings
Restored!
Please wait..