Set Date And Time; Information; Format Device - Evistr L53 Manual

http://evistr.com
Voice Append
PART ONE
Played part
NOTICE: select voice append, and then enter recording mode, after recording, press STOP, saved the recording, the
newly recorded part "NEW PART" will be added at the end of the original recording
5. Go to Bookmark:
If a recording had bookmarks, go browse it
6. Delete Bookmark:
If a recording had bookmarks, go to delete it

10) Set Date and time

The path for set data & time
Set Date
Press M (menu) -- >> Menu choice -- >> System setting -- >> Date and time -- >> Set date
And now we can adjust the year month day (YY/MM/DD)
By pressing FF/REW to adjust, tap PLAY button to move to next. When completed date setting, press
M to confirm and save.
Set Time
Press M (menu) -- >> Menu choice -- >> System setting -- >> Date and time -- >> Set time
And now we can adjust the hour, minute (HH/MM)
By pressing FF/REW to adjust, tap PLAY button to move to next. When completed date setting, press
M to confirm and save.

11) Information

Player Information: Device shows the firmware version and the release date.
Disk Space: Device shows the free space and total space.

12) Format Device

This will format the disk and erase all data on the device, so remember to back up important files
before doing.
Select Yes, press M confirm. Device will start to reformat and erase all data. Wait until the device
reboots and completes the process.
Note: Do not turn off power when formatting device. If, unfortunately, the devise is mistakenly cut
off, it will show as disk error.
EVISTR VOICE RECORDER
PART TWO
New part will be added at the end of
Paused Point
Page - 13 - of -18 -
support@evistr.com
your original recording
NEW PART