Page 1
Write the issues with model number or amazon order ID, so we can reply to you effectively Thanks for purchasing A Recorder from EVISTR EVISTR - to be the leading voice recorder brand We hear from our customers, do all our efforts to make better service...
12) Format Device........................- 12 - 13) How to Connect to Computer....................- 13 - 14) Format EVISTR L157 Drive on Computer Directly..............- 13 - 15) System Time & Date Setting....................- 14 - 16) Go to Setting (Menu Options)....................- 15 - CHAPTER THREE..........................- 15 -...
CHAPTER ONE L157 Open Box 1) The Package Information The original package comes with film wrapped, and have bar code information Package List 1 x L157 Machine 1 x Earphone 1 x USB Cable (for data transfer and charging) ...
EVISTR VOICE RECORDER http://blog.evistr.com support-us@evistr.com Learn how to operate the buttons in the product sketch. Built-in Mic: Captures the voice and records. Do not click on buttons when device is recording. Earphone: You may plug in earphones to hear the playback.
EVISTR VOICE RECORDER http://blog.evistr.com support-us@evistr.com Play a Recording: Choose the recording you wish to hear by pressing Menu -> use Up/Down button to choose, press PLAY. Play Next / Previous Recording: press the Up/Down button. Fast Forward / Rewind: press and hold the Up(REW)/Down(FF) button.
there is no operation such as playing or recording. CHAPTER TWO L157 Basic Operation Guide 1) Charging Voice Recorder Connect it to computer with enclosed cable, it will charge, once it has finished charging ( typically around 1.5-2 hours), we could eject the device from the USB port...
EVISTR VOICE RECORDER http://blog.evistr.com support-us@evistr.com See below picture NOTE: we recommend that you push the POWER button up to the ON position to turn on the device. Unless storing the device, we recommend you turn on/ off the device by pressing down the PLAY button.
Page 9
EVISTR VOICE RECORDER http://blog.evistr.com support-us@evistr.com 1) Press & hold PLAY to turn ON 2) Press REC, to record NOTE: press STOP to save recording every time when complete a recording task. 3) Press STOP, save recordings If, for example, we press REC and STOP 3 times, the recorder will create 3 recorded files...
EVISTR VOICE RECORDER http://blog.evistr.com support-us@evistr.com view file properties, we will see the recordings file time File Name Format: Year-Month-Day-Hour-Minute-Seconds See the right side picture shows: 6) How to Pause and Resume Your Recording During recording, press PLAY pause recording Press PLAY again, resume recording...
A. Format the recorder EVISTR L157 disk on your WINDOWS computer directly (all data will be erased completely) B. From computer, go to EVISTR L157 disk, find folder “RECORD”, select the recordings you want to delete on computer C. Format the recorder on the device directly D.
EVISTR VOICE RECORDER http://blog.evistr.com support-us@evistr.com Press and hold STOP button for 3 seconds, and then release the STOP button, wait a moment, it will switch back to recordings folder 11) Restore to Factory Settings Restores to factory default. Very helpful if confusion arises when creating settings.
1) Successfully connected to computer 2) We will see EVISTR L157 on our computer 14) Format EVISTR L157 Drive on Computer Directly .When successfully connected to computer, click the mouse right button, and format it, like below picture shows:.
EVISTR VOICE RECORDER http://blog.evistr.com support-us@evistr.com Notice: all data will be erased completely, so please backup before formatting device 15) System Time & Date Setting Turn on the voice recorder Press M (menu), find & select " System Setting" Press M(menu), enter System Setting, find & select "Date and time"...
All products with 1 year warranty, and Customer satisfaction was guaranteed. CHAPTER THREE L157 Advanced Operation Guide 1) Record Setting 1.1 Recording Quality At recording quality setting, it could select recording quality at 1536kpbs (WAV format), 128kpbs (MP3 Format), 64kpbs (MP3 format) 1.2 Record Led...
EVISTR VOICE RECORDER http://blog.evistr.com support-us@evistr.com At subsection recording, it could select Half hour, One half, Two hour, CLOSE What is subsection recording? Recorder will automatically save the recording file at a selected time length and start a new recording. Half Hour: record each file at 30minutes.
EVISTR VOICE RECORDER http://blog.evistr.com support-us@evistr.com active the recording, otherwise, the recording time is not counting, and it was pause recording. While level five, is the mostly sensitive level, it means the mic is very sensitive, just a soft speaking will be captured. It will be almost continuously recording, cannot see pause status.
EVISTR VOICE RECORDER http://blog.evistr.com support-us@evistr.com Once set the correctly time, remember press M(menu) to confirm the changes. 2.5 Language Change the device display language 2.6 Information Player Information: it will show the device firmware version, and system firmware released date Disk Space: it will show the free space, and total space of the built-in memory 2.7 Format Device...
EVISTR VOICE RECORDER http://blog.evistr.com support-us@evistr.com Shuffle: When shuffle is on, it will playback all recordings or music in random, even you press UP/DOWN, it will not select to next or previous track, it will be random. 3.2 Sound Setting Sound Settings could adjust Equalizer (off, Rock, Pop, Soft, Jazz, Classical, Techno), Select and confirm changes, it will becomes to effect.
EVISTR VOICE RECORDER http://blog.evistr.com support-us@evistr.com 1) On your computer, go to Computer manage 2) Computer Management 4) Click right mouse button, enable the recorder device / or scan update hard drive changes to help you find the recorder drive 3) Find Device Manager If we still meet the failed connect to computer issues, please kindly contact to us support-us@evistr.com...
6) Can I delete recordings from computer Yes, when the recorder was successfully connected to your computer, you should find it as an removable drive names as “L157”, and all your recordings was saved in a folder names “RECORD” in the drive.
So we could select the best AVR level as we want, and get the best effect of voice activated recording. For L157 voice recorder, the AVR level could be selected from 1 -5; The lower number means need higher decibels voice to activated the recorder, and it need louder voice; At level 5, it is very sensitivity, only a very low decibels or quiet speaking could be picked up.
EVISTR VOICE RECORDER http://blog.evistr.com support-us@evistr.com 12) Press REC, it shows “OVER RECORD” When press REC, it not records, it show “OVER RECORD”, that means the voice recorder memory is full, or you have too many “FOLDER” or “recordings” in the recorder.
EVISTR VOICE RECORDER http://blog.evistr.com support-us@evistr.com So you could also try to restore to factory setting when this happened, if not sure how to set the sleeper time. 18) I Cannot Shut Off My Voice Recorder When the recorder is charging, or connected to computer, even when the POWER BUTTON ON/OFF...
Need help?
Do you have a question about the L157 and is the answer not in the manual?
Questions and answers