Exit; System Setting; Sleeper Timer; Backlight Timer - Evistr L157 Manual

EVISTR VOICE RECORDER
http://blog.evistr.com support-us@evistr.com
End Time: end to recording and save recording
Record Cycle:
Once: only work 1 time
Daily: Auto recording everyday at specified time
Work Day: Auto recording work day at specified time

1.7 Exit

Exit record setting, return to up level menu

2) System Setting

2.1 Sleeper timer

When select sleeper time, it will force the device to be automatically switch off.
The options: OFF, 10minutes, 30minutes, 60minutes, 90minutes, 120minutes

2.2 Backlight timer

Backlight timer, it will control how long the screen will light up without any operation.
The options: 20seconds, 30seconds, Always on
Notice: we do not recommend to select at always on, because this will consume the battery
very fast

2.3 Brightness

Brightness: adjust the screen from dark to bright
The options: from 00 to 15
Notice: higher number means the screen will be brighter, and need to press M(menu) to
confirm the changes, otherwise the setting will not be effect.

2.4 Date and time

Set the system time of the recorder (set time, and set date)
FF/REW (UP/DOWN): to adjust the hour, minute, year, month, day
VOL+/VOL-: move to next
Notice:
Once set the correctly time, remember press M(menu) to confirm the changes.
Only set correctly time, and keep the POWER button at ON position, so the AUTO RECORD
function could work properly as desired

2.5 Language

Change the device display language

2.6 Information

Player Information: it will show the device firmware version, and system firmware upgraded
date
Disk Space: it will show the free space, and total space of the built-in memory
Page - 17 - of -25 -