Briggs & Stratton NEMA 3R Installation Manual page 2

Automatic transfer switch with ac power control module
Hide thumbs Also See for NEMA 3R:
Table of Contents

Advertisement

Thank you for your purchase of this Briggs & Stratton® automatic transfer switch. This product is designed for use with specific standby
generators and may not function with generators produced by other manufacturers. Seek a qualified electrical professional to determine
applicability of this equipment to equipment manufactured by others. When operated and maintained according to the instructions in this
manual, your system will provide many years of dependable service.
This manual contains safety information to make you aware of the hazards and risks associated with this system and how to avoid them.
We have made every effort to provide for a safe, streamlined and cost-effective installation. As each installation is unique, it is impossible
to know of and advise of all conceivable procedures and methods by which installation might be achieved. We do not know all possible
hazards and/or the results of each possible method or procedure. It is important that you read and understand these instructions thoroughly
before attempting to install or operate this equipment. Save these original instructions for future reference.
This transfer switch requires professional installation before use. Refer to the Installation section of this manual for instructions on
installation procedures. Only licensed electrical contractors should install transfer switches. Installations must strictly comply with all
applicable federal, state and local codes, standards and regulations. Your installer should follow the instructions completely.
Where to Find Us
You never have to look far to find Briggs & Stratton support and service for your system. Consult your Yellow Pages. There are many
authorized service dealers who provide quality service. Click on Find a Dealer at BRIGGSandSTRATTON.COM, which provides a list of
authorized dealers.
For Future Reference
Please fill out the information below and keep with your receipt to assist in unit identification for future purchase issues.
Model Number
Revision
Serial Number
Date Purchased
ORIGINAL INSTRUCTIONS (ENGLISH)
Copyright © 2013. Briggs & Stratton Power Products Group, LLC
Milwaukee, WI, USA. All rights reserved.
Briggs & Stratton Power Products is a registered
trademark of Briggs & Stratton Corporation
Milwaukee, WI, USA
2
BRIGGSandSTRATTON.COM

Advertisement

Table of Contents
loading

Table of Contents