Preface; About This Manual; Manual Organization - Supero AS-1011S-MR2 User Manual

Preface

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the AS1011S-MR2 server. Instal-
lation and maintenance should be performed by experienced technicians only.
The AS1011S-MR2 is a high-end server based on the SC512F-260 1U rack-
mount chassis and the H8SSL-i2, a single processor motherboard that supports
AMD Opteron 1000 series processors and up to 8 GB of ECC/non-ECC DDR2-
800/667/533 SDRAM.

Manual Organization

Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the H8SSL-i2 motherboard and
the SC512F-260 chassis, which comprise the 1011S-MR2.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the 1011S-MR2 into a rack and
check out the server confi guration prior to powering up the system. If your server
was ordered without processor and memory components, this chapter will refer you
to the appropriate se ctions of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
iii