Installing The System Into A Rack - Supero AS-1011S-MR2 User Manual

AS1011S-MR2 User's Manual
2-4

Installing the System into a Rack

(Rack hardware optional)
This section provides information on installing the 1011S-MR2 into a rack unit. If
the system has already been mounted into a rack, you can skip ahead to Sections
2-5 and 2-6.
Basic Installation Procedure
The 1011S-MR2 server comes with two rack mounting brackets, which are located
on each side at the front of the chassis. To mount the system into a rack, simply
screw these brackets directly to the front of the rack (two screws for each bracket).
As Figure 2-1 shows, the brackets can be located at the front of the chassis (left
fi gure) or moved approximately one-third to the rear of the chassis (right fi gure).
Figure 2-1. Installing the Server into a Rack: Basic
2-4