JVC CL-R190 Instruction Manual page 33

ICON ITEMS
i
SETUP
Functions and description
Set the scaling mode from the following
selection.
- FULL: Set the full screen mode.
- 4:3 : Set the 4:3 aspect ratio.
SCALING
- 16:9 : Set the 16:9 aspect ratio.
- ONE BY ONE: Set the dot to dot aspect
Default setting is Full scaling mode.
Adjust the Sharpness of the receiving image.
*1
SHARPNESS Adjustable range is from 0 to 10.
Default setting is 5 (normal)
OSD H.POSITION:
Adjust the OSD horizontal position.
Adjustable range is from 0 to 100.
Default setting is 99. (Right bottom side)
OSD V.POSITION:
Adjust the OSD Vertical position.
Adjustable range is from 0 to 100.
Default setting is 99. (Right bottom side)
AUTO SEARCH ON / OFF:
Enable or disable the automatic input signal
searching function.
When enabled, automatically search the input
signal and display the active signal.
Default setting: On.
INPUT
DISPLAYPORT:
Set the video input to the DisplayPort.
DVI:
Set the video input to the DVI.
VGA:
Set the video input to the VGA.
- 33 -
OSD Menu table-3
Original image aspect ratio is neglected.
ratio. (No scaling)
English