Barcodes/Two-Dimensional Symbols - Epson TM-C710 Technical Reference Manual

Barcodes/Two-Dimensional Symbols

Barcodes/Two-dimensional symbols encodable by the printer
driver
Barcode/two- Barcodes
dimensional
Identification rate:
symbol printing
ANSI rank D (based
on Seiko Epson
Corporation
standard)
Two-dimensional
symbols
If you want to create graphic data for barcodes/two-dimensional symbols, create data which
meet the following conditions.
 Use black as the print color of the barcode on blank paper (not pre-printed).
 When creating barcode/2-dimensional symbol data as the graphic data, use the input resolu-
 Because of the characteristics of the ink, it may penetrate the paper, and bars of printed bar-
Input resolution
(horizontal  vertical)
180  180 dpi
360  360 dpi
360  360 dpi
22
UPC-A, UPC-E, JAN 8 (EAN 8), JAN 13 (EAN 13), CODE 39, CODE
128, GS1-128, GS1 DataBar Omnidirectional, 
GS1 DataBar Truncated, GS1 DataBar Limited, 
GS1 DataBar Expanded
Stack type:
 PDF417, GS1 DataBar Stacked, GS1 DataBar Stacked Omni-
directional, GS1 DataBar Expanded Stacked
Matrix type:
 QR Code
tion in the table below. At other resolutions, the barcode reader may return errors.
codes may become thicker. This depends on the paper. Users can maintain the barcode recog-
nition rate by methods such as ± 1 correction, reducing the data in a bar by one pixel and
increasing the blank space by one pixel. Be sure not to use this method for the two-dimen-
sional symbols.
Graphic resolution
(horizontal  vertical)
360  180 dpi
360  360 dpi
720  360 dpi