Figure 10-7 Telnet Into Menu 24.6; Figure 10-8 Ftp Restore Example - ZyXEL Communications VES-1000 Series User Manual

To transfer the firmware and configuration file to your workstation, follow the
procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your router. Then type "root" and
SMT password as requested.
3. Type "put backupfilename rom-0" where backupfilename is the name of
your backup configuration file on your workstation and rom-spt is the
remote file name on the router. This restores the configuration to
your router.
4. The system reboots automatically after a successful file transfer
For details on FTP commands, please consult the documentation of your FTP
client program. For details on backup using TFTP (note that you must remain
in this menu to back up using TFTP), please see your router manual.
Press ENTER to Exit:
FTP Restore Procedure
Launch the FTP client on your computer.
Step 1.
Enter "open", followed by a space and the IP address of your VES-1000 Series switch.
Step 2.
Press [ENTER] when prompted for a username.
Step 3.
Enter your password as requested (the default is "1234").
Step 4.
Enter "bin" to set transfer mode to binary.
Step 5.
Find the "rom" file (on your computer) that you want to restore to your VES-1000 Series switch.
Step 6.
Use "put" to transfer files from the VES-1000 Series switch to the computer, for example, "put
Step 7.
config.rom rom-0" transfers the configuration file "config.rom" on your computer to the VES-1000
Series switch. See earlier in this chapter for more information on filename conventions.
Enter "quit" to exit the ftp prompt. The VES-1000 Series switch will automatically restart after a
Step 8.
successful restore process.
10.3.2 FTP Restore Example
ftp> put config.rom rom-0
200 Port command okay
150 Opening data connection for STOR rom-0
226 File received OK
221 Goodbye for writing flash
ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec.
ftp>quit
Firmware and Configuration File Maintenance
Menu 24.6 -- System Maintenance — Restore Configuration

Figure 10-7 Telnet into Menu 24.6

Figure 10-8 FTP Restore Example

VES-1000 Series Ethernet Switch
10-7