Hardware And Installation; Desktop Installation; Rack-Mounted Installation - ZyXEL Communications PoE-80 User Manual

Eight-port power over ethernet hub

Hide thumbs Also See for PoE-80:

Table of Contents

2 Hardware and Installation

Do not block the device's rear panel fans or the side panel ventilation

holes. Leave space between devices when stacking.

Step 1.

Set the PoE-80 upside-down on a sturdy level space with a power outlet nearby.

Step 2.

Make sure there is enough clearance around the PoE-80 to allow air circulation and the

attachment of cables and the power cord.

Step 3.

Remove the adhesive backing from the supplied rubber feet.

Step 4.

Attach the rubber feet to each corner on the bottom of the PoE-80. These rubber feet help

protect the PoE-80 from shock or vibration and ensure space between devices when

stacking.

Step 5.

Turn the PoE-80 right-side up after you attach the rubber feet.

The PoE-80 can be mounted on an EIA standard size, 19-inch rack or in a wiring closet with other

equipment. Follow the steps below to mount your PoE-80 on a standard EIA rack using the included

rack-mounting kit.

Step 1.

Align one bracket with the holes on one side of the PoE-80 and secure it with the bracket

screws. Similarly, attach the other bracket.

PoE-80 User's Guide

Table of Contents

Show Quick Links

Table of Contents