Heat Sink; Removing The Heat Sink - Dell W29C Service Manual

Steps
With the positive-side facing up, insert the coin-cell battery into the battery socket on the system board and snap the battery
into place.
Next steps
1. Install the system-board
2. Install the I/O cover.
3. Install the back cover.
4. Install the stand.
5. Follow the procedure in

Heat sink

Removing the heat sink

Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the back cover.
4. Remove the I/O cover.
5. Remove the system-board
About this task
The following image indicates the location of the heat sink and provides a visual representation of the removal procedure.
42 Removing and installing components
shield.
After working inside your
Before working inside your
shield.
computer.
computer.