Clock Minute Minder Operation; Setting The Clock; Setting The Minute Minder - Whirlpool WS67G1CMX/MEA Manual

EN

CLOCK MINUTE MINDER OPERATION

/ / / /
•• ••
DECREASE TIME
button

Setting the clock

The clock may be set when the oven is switched off
or when it is switched on, provided that the end time of
a cooking cycle has not been programmed previously.
After the appliance has been connected to the mains,
or after a blackout, the 00:00
digits on the DISPLAY will begin to flash.
1. Press the "+" and "-" button simultaneously
Than the colon between hours and minutes is flashing.
DISPLAY
TIMER icon
INCREASE TIME
button
MODE
button
2. Use the "+" and "-" buttons to adjust the time; if you
press and hold either button, the display will scroll
through the values more quickly, making it quicker and
easier to set the desired value.
Changing the buzzer frequency
The buzzer signal frequency can be changed by
touching the "- " repeatedly.

Setting the minute minder

This function does not interrupt cooking and does not
affect the oven; it is simply used to activate the buzzer
when the set amount of time has elapsed.
1. Press the button several times until the
and the three digits on the display begin to flash.
2. Use the "+" and "-" buttons to set the desired time; if
you press and hold either button, the display will scroll
through the values more quickly, making it quicker and
easier to set the value.
3. Wait for 5 seconds, If you press the buttom one more time
the display will then show the time as it counts down.
When this period of time has elapsed the buzzer will be
activated.
15
icon