Clock/Minute Minder Operation - Whirlpool ACWT 5V331/WH Instructions For Use Manual

Clock/Minute
Minder Operation
GB
AUTO
icon
DECREASE TIME
button
Setting the clock
The clock may be set when the oven is switched off
or when it is switched on, provided that the end time of
a cooking cycle has not been programmed previously.
After the appliance has been connected to the mains,
or after a blackout, the 00:00
digits on the DISPLAY will begin to flash.
1. Press the "+" and "-" button simultaneously
Than the colon between hours and minutes is flashing.
2. Use the "+" and "-" buttons to adjust the time; if you
press and hold either button, the display will scroll
through the values more quickly, making it quicker and
easier to set the desired value.
Changing the buzzer frequency
1. First press "+" and "-" button simultaneously
and than press the
for changing the buzzer frequency. While the text tonX is
visible the buzzer signal frequency can be changed by
touching the "- " repeatedly.
Setting the minute minder
This function does not interrupt cooking and does not
affect the oven; it is simply used to activate the buzzer
when the set amount of time has elapsed.
1. Press the button several times until the
and the three digits on the display begin to flash.
2. Use the "+" and "-" buttons to set the desired time; if
you press and hold either button, the display will scroll
through the values more quickly, making it quicker and
easier to set the value.
3. Wait for 5 seconds, If you press the buttom one more time
the display will then show the time as it counts down.
When this period of time has elapsed the buzzer will be
activated.
30
COOKING PROCESS
icon
DISPLAY
•• ••
A
U
T
TIMER icon
O
M
INCREASE TIME
button
MODE
button
button for selecting the menu
Programming cooking
A cooking mode must be selected before
programming can take place.
Programming the cooking duration
1. Press the
and the DUR digits on the DISPLAY begin to flash.
2. Use the "+" and "-" buttons to set the desired
duration; if you press and hold either button, the
display will scroll through the values more quickly,
making it quicker and easier to set the value.
3. Wait for 5 seconds, after that the icon
on the display.
4. When the set time has elapsed and the oven will stop cooking
you will hear a buzzer sounds. Press any button to stop the
buzzer.
• For example: it is 9:00 a.m. and a time of 1 hour and
15 minutes is programmed. The programme will
stop automatically at 10:15 a.m.
Setting the end time for a cooking mode
1. Follow steps 1 to 3 to set the duration as detailed
above.
2. Next, press the
begin to flash.
3. use the "+" and "-" buttons to adjust the cooking end
time; if you press and hold either button, the display
will scroll through the values more quickly, making it
quicker and easier to set the desired value.
4. Wait for 5 seconds or press the
When the cooking process start, the symbol
on the display.
5. When the set time has elapsed, the oven will stop cooking
and a buzzer
Programming has been set when the icon
is illuminated.
• For example: It is 9:00 a.m. and a duration of 1 hour
icon
has been programmed. 12:30 is scheduled as the
end time. The programme will start automatically at
11:30 a.m.
Cancelling a programme
To cancel a programme:
• press the
the setting you wish to cancel and the digits on the
display are flashing. Press the "-" button until the
digits 00:00 appear on the display.
• Press and hold the "+" and "-" buttons; this will
cancel all the settings selected previously, including
timer settings.
button several times until icon
A
U
T
O
button until the text END on the diplay
button again,
sounds.Press any button to stop it.
button until the icon corresponding to
A
U
T
O
will be visible
is visible
A
U
T
O