Dmx Channels - SHOWTEC LED Pinspot DMX V3 Quick Start Manual

DMX products must have their own "address" to receive DMX signals.
by flipping the appropriate DMX dipswitches.
You need to know that DMX address settings are the sum of the dip switch values.
A standard DMX address for a Showtec LED Pinspot, which has 6 channels is as follow:
Example
LED Pinspot Address Value
Unit 5 25
Switch Value
#1 1
#4 8
#5 16 +
Total sum 25
Explanation: Since each unit has 6 channels, each address advances 6 values (See Address Value
above).
Once address values are determined, add DMX dip switch values to obtain the appropriate address
(DMX Dip Switches "ON") for each unit. Flip appropriate DMX dip switches on each unit.

DMX Channels

Channel 1 – „R"
Channel 2 – „G"
Channel 3 – „B"
Channel 4 – Full Color
Channel 5 – Strobe and Speed
Channel 6 – Modi
Mode 1 Mode 2
0 - 31 RGB control 32 – 63
Lightness
decreasing
(Fade OUT)
DMX Dip Switches "ON"
#1 , #4, #5
Mode 3 Mode 4
64 – 95 96 – 127
Lightness Fade OUT & IN
decreasing Mode
(Fade IN)
8
Addresses on the controller are set
Mode 5 Mode 6
128-159 160-191
Mix color 3-color
automatically flash
(chasing)
Mode 7 Mode 8
192-223 224-255
7-color Sound-control
flash
(chasing)