Table of Contents
Advertisement
6.2 Bluetooth
This menu allows you to open the Bluetooth search detection ON or OFF, to setup new connections
to other Bluetooth devices.
If you like to make connection you need to open on both devices this function. With a confirmation
by numeric key you make a secured connection.
6.3 Display
In this menu you can select your preferred HDMI output resolution which is supported by the
connected TV. The AUTO mode automatically selects the best output resolution of the combination
(so called 'handshake'). Select Screen adjust if size of displayed screen is bit to large or too small for the
connected screen.
6.4 Audio
In this menu you can setup the correct audio output setting if you like to use Dolby audio to connect
to a digital amplifier.
Touch sounds:
Off for no click sound.
HDMI audio:
Digital audio:
The selection PCM gives only Stereo to all outputs.
6.5 Language
Select the OSD language which shall be used for the menus on screen.
6.6 General
This menu allows you to change the name of your IP Box Strong to another, set Auto Standby mode
and change the system password.
6.6.1 Name IP box
This menu item allows you to change the name of your Android IP Box to what you want it to be
recognized as by IP functions.
6.6.2 Auto Standby
Auto Standby helps you reducing power consumption. When set to 30Min/1 Hour/2 Hours up to 6
Hours, the IP Box will switch to standby if it doesn't receive any commands during this time. Set Auto
Standby to Off to deactivate the automatic standby function.
NOTE:
Select On to hear every time a click of remote buttons as confirmation. Select
Select On if you like to use this also for audio output.
Select Off if you not like to use this also for audio output but be a wear that no
audio is going to TV screen!
The selection RAW data sends Dolby audio to outputs depending on above
setting.
Some apps can keep the box awake and overwrite this function.
13
Advertisement
Table of Contents
