Add Accessory (Bluetooth); Display; Sounds; Language - Strong SRT 2021 User Manual

6.2 Add accessory (bluetooth)

This menu allows you to open the Bluetooth search detection ON or OFF, to setup new connections
to other Bluetooth devices.
If you like to make connection you need to open on both devices this function. With a confirmation
by numeric key you make a secured connection.

6.3 Display

Here you can set your Screen resolution, Screen position and Daydream.
6.3.1 screen resolution
In this menu you can select your preferred HDMI output resolution which is supported by the
connected TV. The AUTO mode automatically selects the best output resolution of the combination
(so called 'handshake').
6.3.2 screen position
Select Screen position if the size of the displayed screen is a bit too large or too small for the
connected screen.
6.3.3 Daydream
You can set your Daydream screen in None or Colours.
Choose the period of inactivity to start Daydream: (5, 10, 15, 30, 60 minutes, Never).
When to sleep: Screen turns OFF after this period of inactivity: (30minutes, 1, 3, 6, 12 hours, Never).

6.4 sounds

In this menu you can setup the correct audio output setting if you like to use Dolby audio to connect
to a digital amplifier.
System sounds:
Digital sounds:

6.5 Language

Select the OSD language which shall be used for the menus on screen.
6.6 storage & Reset
This menu gives you an overview of your storage device.
You can also do a Factory data reset.
6.6.1 storage
Here you get an overview from the used space on your storage device.
You can also clear your cached data for all apps in Cached data.
Select On to hear every time a click of remote buttons as confirmation. Select
Off for no click sound.
The selection HDMI sends Dolby audio. The selection PCM gives only Stereo
to all outputs.
13