Connections; Basic Connection; Connecting To The Internet; Connecting To An Audio Amplifier - Strong SRT 2020 Installation Instructions Manual

Android ip box
Table of Contents

Advertisement

3. Remove the batteries from the remote control and insert them again. The LED on the remote
control starts flashing.
4. Press and hold the OK and
remote control flashes more quickly.
5. Insert the USB adapter into a free USB port of the receiver and wait until the LED on the remote
control stops flashing (fig. 6).
6. Now the remote control is paired with the USB adapter.
NOTE:

3.0 CONNECTIONS

3.1 Basic connection

a. Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the
other end to the HDMI input of your TV.
b. Connect the LAN cable from your router/Internet connection into the RJ45 LAN input.
c. Plug in the power plug from the 12 V adapter and insert the adapter into a suitable wall outlet.

3.2 Connecting to the Internet

a. For the best performance we advise using a wired connection to your router.
b. Alternatively, you can use the in-built wireless adapter to connect to the Internet via your
wireless router.
Note:

3.3 Connecting to an Audio Amplifier

Use the optical S/PDIF output to connect your IP Box to the digital input of your Hi-Fi system or audio
amplifier. In the Android Audio menu you can select the Digital audio option to activate Dolby digital
audio by selection RAW or disable and select PCM for down mix to stereo audio.
buttons at the same time for a few seconds. The LED on the
The function of Standby on the remote control is limited or not possible if
there are obstacles in front of the remote control sensor on the front panel
of the IP Box. If only the Standby button is working and there is no reaction
when pressing any other button it could be that the batteries are empty or
the USB adapter was removed or, as mentioned above, you need to pair
the USB adapter to the remote control manually.
Be aware that the Internet speed will be reduced by walls or long distance
between the IP Box and the router when using wireless connection. This
will lead to lower quality of video streams from the Internet.
Fig. 7
Fig. 7
Fig. 7
7

Advertisement

Table of Contents
loading

Table of Contents