Subaru FORESTER 2020 Quick Reference Index page 38

11 ENTERTAINMENT
11.2 Telematics System
Advanced Automatic Collision Notification
This is a function to automatically notify the operator with highest priority against other services when there is a large
impact due to collision, and the DCM will receive collision detection signal.
Telematics Customer Care Advisor will communicate with the occupant, and provide appropriate service depending on
the condition of the occupant. Also, an audio guidance of "Call connecting to SUBARU STARLINK emergency
services." is played when connecting to an operator.
The following items are functions during operation (canceling by the customer is not possible).
• The DCM will continue to operate with the built-in battery even if the vehicle battery power source is disconnected.
• Red or green LED indicator flashes during the call.
Airbag CM
• Crash detection
AACN data
• Number of crashes
• Vx MAX Vy MAX
• Airbag deployment information
• Data for emergency call
LED indicator
• Green & red (On/Blink)
Head unit
• Mute control
No.
1 Acquires the location information from the GPS.
2 Sends the collision detection signal.
3 Sends the collision notification (including result of 1) to the
server.
4 Mutes the head unit.
5 Flashes the LED indicator.
6 Outputs the guidance to the speaker.
7 Sends AACN data.
8 Communicates with an operator.
DCM
(7)
(1) Vehicle location information acquisition (always)
(2) (2) Crash detection signal received
(3) Main antenna output
(3)' Sub antenna output
*Switched to sub when main is disabled due to a collision
(4) Mute control
(5)
(5) Indicator control
(6) Guidance output
(7) AACN data transmission
(4)
(8) Telephone call
(8)
Main antenna (roof)
Control description
Speaker
Microphone
(8)
(6) (8)
,
(3) (7)
(8)(3) (7)
Sub antenna
(instrument
panel)
Operator
DCM
Airbag control module
DCM
DCM
DCM
DCM
Airbag → DCM → server
DCM
11-24
(1)
GPS antenna
NC-04429
Supported unit