Audio - Axis ExCam XF Q1785 User Manual

AXIS Q17 Series
The web interface
Gatekeeper
A gatekeeper monitors an area such as an entrance gate. When motion is detected in the monitored area, the gatekeeper steers
the camera to a selected preset position. Using a zoomed-in preset position can make it possible to, for example, read a license
plate or identify a person. When motion is no longer detected, the camera returns to its home position after a defined time.
Control queue
User control queue
• PTZ control queue: Turn on to place PTZ control requests in a queue. This displays the users status and position in the
queue. To use the PTZ controls in AXIS Camera Station, turn off this setting.
-
-
• The user groups are listed in a prioritized order with the highest priority on top. To change the priority of a user
group, click
For each user group:
-
-
-
-
-
Settings
• Limit number of users in queue: Set the maximum number of users allowed in a queue. The default number is 20,
and allowed values are 1–100.
• Control queue poll time: Set how often to poll the camera to update the place of the users or user groups in the
queue. The default value is 20 seconds, and allowed values are from 5 seconds to 60 minutes.

Audio

Device settings
Input: Turn on or off audio input. Shows the type of input.
Allow stream extraction
Input type: Select the type of input, for instance, if it's a microphone or line.
Power type: Select power type for your input.
Apply changes: Apply your selection.
Separate gain controls
Automatic gain control
Gain: Use the slider to change the gain. Click the microphone icon to mute or unmute.
Stream
Encoding: Select the encoding to use for the input source streaming. You can only choose encoding if audio input is turned on. If
audio input is turned off, click Enable audio input to turn it on.
Enter queue: Click to add your request for PTZ control to the queue.
Release control: Click to release the PTZ control.
and drag the user group up or down.
Timeout duration: Set the amount of time to wait before timeout. The default value is 1 minute, and
allowed values are from 1 second to 60 minutes.
Timeout type
Timespan: Time out after reaching the set duration.
Activity: Time out after reaching the set duration since the last activity.
Infinity: Never to time out until a user with higher priority takes control.
: Turn on to allow stream extraction.
: Turn on to adjust the gain separately for the different input types.
: Turn on to dynamically adapt the gain to changes in the sound.
31