Table of Contents
Advertisement
Indicator lights
-
lights up when the condensed water
container needs to be emptied.
-
lights up when the plinth filter needs
to be cleaned.
- PerfectDry
The PerfectDry system measures the
residual moisture present in the
laundry in programs with selectable
drying levels and provides a more
precise drying result.
The PerfectDry indicator
– will flash until the program duration
has been determined, and then go
out
– lights up again when the selected
drying level is reached toward the
end of the program
– does not light up at all with the
programs Woolens Handcare,
Time Dry/DryFresh
Gentle sensor button
This should be selected for
temperature-sensitive textiles with the
symbol. When the sensor button is
touched, Gentle will light up brightly.
With some programs, Gentle is always
active (lights up) or inactive (does not
light up).
Operating the tumble dryer
Time display
The remaining program duration will be
displayed in hours and minutes.
With most programs, the duration
displayed may vary or "jump". The
following factors, among others, affect
the program duration displayed: the
quantity of laundry, the type of fabric,
and the residual moisture in the laundry.
The electronic continually assesses
conditions in the appliance and then
adjusts the program duration with
increasing accuracy.
Sensor buttons
-
After touching the sensor button,
a later start time for the program
(Delay Start) can be selected. Once
selected, lights up brightly.
-
The or sensor buttons are used
for selecting the duration of the Delay
Start period or the duration of the
Time Dry/DryFresh program.
Start/Add laundry sensor button
Touching the Start/Add laundry sensor
button starts a program. The current
program can be interrupted to add
laundry. The program can be started
when the sensor button is flashing on
and off. The sensor button lights up
constantly once the program has
started.
17
Advertisement
Table of Contents
