Install The Log Assembly - Hearth & Home MDV3732 Installation Manual

D. Install the Log Assembly
Models: DV3732, DV3732L, MDV3732
CAUTION: Logs are fragile, handle with care.
See Figure 1 for log identifi cation.
2 2
4 4
5 5
Figure 1.
LOGS-3732 SHOWN LOGS-3732 SHOWN
Figure 3.
Log #1 SRV2355-701 (LOGS 3732) and SRV2399-701 (LOGS-DV4236): Locate the bottom right hole on Log #1 with the
shoulder screw on the burner top. Locate the bottom left hole on Log#1 with the tab on the pilot hood. See Figure 3.
LOGS-3732 SHOWN LOGS-3732 SHOWN
2 2
Figure 4.
Log #2 SRV2355-702(LOGS-3732 and LOGS-DV4236): Locate the bottom hole on Log #2 with the shoulder screw on the
left front side of the base pan. See Figure 4.
Log #3 SRV2355-703 (LOGS-3732 and LOGS-DV4236): Locate the bottom hole on Log #3 with the shoulder screw on
the right front side of the base pan. See Figure 5.
56
1 1
3 3
6 6
(DV4236 ONLY) (DV4236 ONLY)
1 1
1 1
Heatilator • MDV3732 Installation Manual • 2386-980 Rev. D • 11/16
LOG PLACEMENT INSTRUCTIONS
NOTICE: DO NOT bend handbend tabs in basepan.
They must remain fl at for proper log placement.
LOG PLACEMENT POINTS LOG PLACEMENT POINTS
LOGS-DV4236 SHOWN LOGS-DV4236 SHOWN
Figure 2.
Figures 2 shows the log placement points for LOGS-3732
and LOGS-DV4236. There are three shoulder screws and
a tab on the pilot hood.
LOGS-3732 SHOWN LOGS-3732 SHOWN
2 2
Figure 5.
1 1
3 3