Replacement Of Battery In Rf Remote Controller - Gree LE60-13/C1 Owner's Manual

RF Remote Controller LE60-13/C1
NOTE!
When operating the RF remote controller, make sure it is within the receiving
range of the zone control interface.

4.3 Replacement of Battery in RF Remote Controller

(1) Use a tool to gently open the clasp, and then remove the RF remote
controller in the direction of the arrow;
(2) Take out old battery;
(3) Install the button battery (CR2450) at the buttery holder. Please note that
the positive and negative poles should be connected correctly;
(4) Buckle RF remote controller and the base together.
Figure 4-1 Replacement of battery in RF remote controller
10