Led Indicators; Sd Card Slot - Axis Q35 Series User Manual

AXIS Q35 Network Camera Series
Specifications
4
Audio out
5
Audio in
6
DC connector
7

SD card slot

8
Status LED (2x)
9
Function button
10 Heater
11 IR LED (2x)
CAUTION
The heater may be hot.

LED Indicators

Note
• The Status LED can be configured to flash while an event is active.
Status LED
Unlit
Green
Amber
Amber/Red
Status LED behavior and buzzer signal for leveling assistant
For information on the function button used for leveling the image, see page 58.
Color
Fixed green
Flashing green
Flashing orange
Flashing red
SD card slot
NO NOTICE NO TICE TICE
• Risk of damage to SD card. Don't use sharp tools, metal objects, or excessive force when inserting or removing the SD card.
Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Unmount the SD card from the device's web interface before removing it.
Don't remove the SD card while the product is running.
This device supports microSD/microSDHC/microSDXC cards.
For SD card recommendations, see axis.com.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Indication
Connection and normal operation.
Steady green for 10 seconds for normal operation after startup completed.
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Flashes amber/red if network connection is unavailable or lost.
Buzzer
Continuous beep
Fast beeps
Medium beeps
Slow beeps
Camera position
Level
Almost level
Not level
Far from level
58