Advertisement
Valve/Hose/Regulator and Ignitor
7
'
Attach valve/hose/regulator assembly to control panel with #10-24x1/2" screws.
are leveled; otherwise, this can cause main burner level problems.)
'
Insert ignitor into control panel. Connect terminal of the ignitor wires to pin located at the end and side of
ignitor.
Valve/Hose/Regulator
Tank Retainer
8
'
Insert tank retainer into bracket and secure with wing screw.
Qty: 1
#10-24x3/8"
Wing Screw
Short Ignitor Wire
Sideburner Ignitor Wire
Ignitor
Tank
Retainer
(Note: Make sure the two valve stems
Qty: 2
#10-24x1/2"
Screw
463720108 • 17
Advertisement
