Connect To A Bluetooth Device; Power On; Power Off (Standby); Change The Mode - Bush WI-1810 Instruction Manual

Getting to know your Internet Radio with
Bluetooth
You'll be up and running in no time
14. Press the left hand Navigation/Select rotary control to select Internet radio. You can
now use the left hand Navigation/Select rotary control to scroll through the options
available and press to Select.

Connect to a Bluetooth device

Check that your radio is in Bluetooth mode. If you are not already in Bluetooth mode,
short press the Mode button until you are in Bluetooth mode (check the display). Your
radio will begin to search for Bluetooth devices.
In Bluetooth Mode:
1. Your radio will search for Bluetooth devices.
2. On the device that you would like to connect to your radio (e.g. iPhone/iPad/Android/
other phone/Tablet/Computer), turn on Bluetooth connectivity and ensure that it is
'discoverable' .
Note: If necessary, refer to the instructions for your device to add or set up Bluetooth.
3. Select to 'Add new device' , if necessary.
Note: Some products will automatically search for a new device and so the 'Add new
device' option is not available.
4. When found, your radio will be displayed as 'BUSH WI-1810' . Select the device name
to begin pairing.
5. When pairing is complete 'Bluetooth Connected' will be displayed.
6. Now that you have paired your device with the radio, it will connect to it when it is
within range, which is about 10 metres or less (33 feet or less), line of sight.
7. Your device will remain paired with the radio unless you decide to disconnect or
'unpair' it.
Note: You can press the Navigation/Select rotary on the top of your radio to unpair
your current device and search for new devices.
18
Getting to know your Internet Radio with Bluetooth
Getting to know your Internet Radio with
Bluetooth
You'll be up and running in no time

Power on

Short press the Power button.

Power off (Standby)

Short press the Power button. The Standby screen will be displayed with the current date
and time.
Weather location
When you are in Standby mode, you can also set a Weather location
1. Short press the or button. 'Set location (Weather) is displayed.
2. Press the Navigation/Select rotary control. A list of countries is displayed.
3. To set for the UK, use the Navigation/Select rotary control to highlight Europe and
press to Select.
4. Use the Navigation/Select rotary control to highlight United Kingdom and press to
Select.
5. Use the Navigation/Select rotary control to highlight England, Northern Ireland,
Scotland or Wales as required, and press to Select.
6. Use the Navigation/Select rotary control to highlight a Town and press to Select. The
current weather information will be displayed. You can use the Navigation/Select
rotary to scroll through the available weather information.
7. Your radio will now switch between the Weather information and the current date and
time when in Standby mode.

Change the mode

Short press the Mode button to change the mode, there are 3 options available: Internet
Radio, Bluetooth and UPnP.
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
Getting to know your Internet Radio with Bluetooth
19