Assembly Instructions Of The Cable Run Box - Carbest ASR 680 SKEW Installation And Use Manual

2.2 Assembly instructions of the cable run box

2.2.1
For easy and quick installation of the satellite dish, find a position on the roof
where the supply and control box will be installed (see 2.3.1) .
2.2.2
With a 20 diameter hole cutter make a hole for the passage of the cables inside
the vehicle's cabin.
2.2.3
Clean and remove any grease from the surface around the hole. Take the cable
box and make a hole in it so the M25 cable (which includes the sat cable and the internal
connection cable) can pass through.
2.2.4
Run the cables inside, through the hole previously made in the roof and fix the
cable firmly to the cable box with the bolt (supplied in the kit).
2.2.5
Apply a generous layer of polyurethane adhesive on the base of the box (use the
same type as that used for the fastening of the external unit). Position the box on the roof
close to the hole and press in order to ensure a good distribution and adhesion of the glue.
Run the cables securely along the roof (insert them into a cable channel in order to protect
them from UV rays) and bring the excess cables into the camper.
2.2.6 The cables must be fastened to the roof in order to prevent them from moving or
being caught by objects such as branches.
The external assembly of the satellite dish is now complete.
8