Safety During Assembly; Use; Destination Of Use - Carbest ASR 680 SKEW Installation And Use Manual

3.4 Safety during assembly

For the assembly operations that imply the risk of fall, the necessary safety pre-
cautions must be adopted: for instance, a work bridge to be used when op-
erating on the vehicle roof. Make sure that the roof of the vehicle has sufficient carrying
capacity for the assembly operations.
Moreover, during assembly make sure that :
- The device is disconnected from the electric mains
- The person in charge of the assembly does not suffer from vertigo
- The person in charge of the assembly wears non-slip and accident-prevention
shoes.
- Nobody is under the satellite dish during assembly.
- The lifting apparatus is non-slip and dry.
- The bridge and ladder are sufficiently stable and robust

USE

4.1 Destination of use

The satellite dish is manufactured for the reception of digital TV and radio signals from a
satellite only when the vehicle is stationary. The reception unit allows for the reception of
satellite TV and radio signals whose frequency is included between 10.7 GHz. and 12.75
GHz. Any different use renders the warranty void.
Caution: SR Mecatronic does not accept any liability for damage caused by:
- Wrong use that does not comply with the intended use of the device
- Repairs not performed by authorised service centres
- Tampering with any mechanical components
- Use of non-original spare parts and fittings
- Non-observance of the instructions in this manual
IN THE ABOVE-MENTIONED CASES THE WARRANTY IS VOID
13
4