Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kilews BSD-C9300L
Summary of Contents for Kilews BSD-C9300L
- Page 1 OPERATION AND MAINTENANCE MANUAL ■BSD-C9300L ■BSD-C9400L ■BSD-C9500L ■BSD-C9300LF ■BSD-C9400LF ■BSD-C9300P ■BSD-C9400P ■BSD-C9500P ■BSD-C9300PF ■BSD-C9400PF LOW VOLTAGE METAL ASSEMBLY SCREWDRIVER KILEWS INDUSTRIAL CO., LTD. http://www.kilews.com Y20070A-1-001...
- Page 3 NOTICE Metal Assembly Screwdrivers are designed for installing threaded fasteners in light industrial and appliance manufacturing applications. KILEWS is not responsible for customer modification of tools for applications on which KILEWS was not consulted. WARNING Important safety information enclosed. Read all these instructions before placing tool in service or operation this tool and save these instructions. It is the responsibility of the employer to place the information in this manual into the hands of the operator.
-
Page 4: Important Safety Instructions
Important Safety Instructions WARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock fire and/or serious injury. The term “power tool” in all of the warning listed below refer to your mains operated (corded) power tool or battery operated (cordless) power tool. - Page 5 e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are cause by poorly maintained power tools.
-
Page 6: Do Not Operate This Tool Without Protective Earth Connected
WARNING！ DO NOT OPERATE THIS TOOL WITHOUT PROTECTIVE EARTH CONNECTED Grounding Instructions This tool should be grounded while in use to protect the operator from electric shock. NOTICE ! To ensure the grounding result, the grounding conductor of the power cord must be well connected with the grounding terminal of power facility. This tool is equipped with grounding conductors. -
Page 7: Description Of Operation
CAUTION ● Do not drop or abuse the tool. ● Whenever a tool is not being used, position the Power Switch to the “OFF” position and unplug the power cord. Description of Operation Attaching / detaching bit and bit type Push up the holder clamp by finger tip, and it will be unlocked. -
Page 8: Do Not Attempt To Repair This Electric Screwdriver
CAUTION The use of other than genuine KILEWS replacement parts may Result in decreased tool performance and increased maintenance, and may invalidate all warranties. All repairs and maintenance of this tool and its word must be performed by an authorized service center. - Page 9 No. 2．． ．．Bit use in dia 3.0-4.0mm screw BSD-C9300.BSD-C9300F with BIT 1# & 2# 1 Pce. Each BSD-C9400.BSD-C9400F with BIT 2 Pce. BSD-C9500 with BIT 2 Pce. 2、Suspension rack and Torque fixing ring acceptable for use with the tool are available from KILEWS catalogue.
-
Page 10: Torque Adjustment Operation
1. Please read the operation manual before you use, and follow safety rules to operate the power controller. 2. The power controller must be used with original KILEWS 7-pin Electric Screwdrivers. 3. BSD-C Series electric screwdriver collocates with BSP-C32HL and additional functions, such as Slow Start, I/O, set up the counting function, etc.
Need help?
Do you have a question about the BSD-C9300L and is the answer not in the manual?
Questions and answers