Connecting The Console/Module - StarTech.com DuraView RACKCONS1708 Instruction Manual

Rack console with kvm switch

Hide thumbs Also See for DuraView RACKCONS1708:

Table of Contents

Instruction Manual

8. Installation is now complete:

Connecting the Console/Module

To connect the KVM Console/Module to a computer, perform the following steps:

1. Remove the four screws from both sides of the KVM console. Be sure to retain these

screws for the next installation step.

2. Attach the mounting brackets to both sides of the KVM console, using the screws

removed in step 1.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the DuraView RACKCONS1708 and is the answer not in the manual?

Rackcons1916