Table of Contents
Advertisement
SD
(MC562dn, MC562dw, ES5462 MFP
CARD
The SD card enables collating of printed pages and can be used to store overlays and
macros, fonts, and secure or proof documents waiting to be printed.
Your machine is fitted with a 4GB SD card as standard. If you wish you can upgrade this
as your machine supports 16GB SD cards. After replacement, you need to configure the
printer driver settings. Refer to
1.
Switch the MFP off and disconnect the power cable. Refer to
machine" on page 21
2.
Remove the outer access cover and place it safely to one side.
3.
Turn locking screw (a) anti-clockwise and remove the inner access cover (b). Place it
safely to one side.
4.
Notice that the SD card has one chamfered corner.
"Setting the driver device options" on page
for details.
a
b
Installing upgrades > 136
MPS2731mc
AND
"Turning off your
)
ONLY
139.
Advertisement
Table of Contents
