Setup
•
To increase pump life, turn power off when not spraying.
•
Do not allow material to dry inside pump, hoses, gun or spray system.
•
To break in new pump run sprayer dry for no more than 2 minutes.
Texture Spraying
1. Connect air hose to user-supplied air compressor &
material hose (G) to material hose outlets.
2. Connect air hose to gun.
ti8534a
3. Open air valve.
ti8528a
Setup
Important
ti8375a
4. Connect material hose to gun.
5. Install spray nozzle. See Recommended Nozzle
Selection Chart, page 10.
To break in new pump run sprayer dry for no more
than 2 minutes.
6. Fill material hopper with 1 gallon of water.
7. Turn power switch (K) ON (leave compressor OFF).
ti9202a
ti8705a
ti9774a
ti8372a
7