Konica Minolta PULSOX-300 Instruction Manual page 26

Oxygen saturation monitor
Hide thumbs Also See for PULSOX-300:
Table of Contents

Advertisement

Probes (SR-5C, SP-5C, LM-5C, SD-5C)
Probes (SR-5C, SP-5C, LM-5C, SD-5C)
■ LED-SPD probe
■ Type
Finger Clip Probe SR-5C
Spot Check Probe SP-5C
Monitor Probe LM-5C
Monitor Probe LM-5C
Personal Probe SD-5C
It can be used with one of Extension Cable EC-300
■ Components that touch the body
Cover:
Wrist band:
Rating nameplate: Polyethylene terephthalate
Equipment classifi cation (based on "UL 60601-1/EN 60601-1")
Protection against electric shock: Internally powered
Type of applied part: BF
Not suitability for use in the presence of fl ammable anaesthetic mixture
with air or oxygen or nitrous oxide.
The instrument is not protected against entry of water.
Only the cleaning method has been stipulated (no disinfection/sterilization
methods have been stipulated).
Mode of operation of Equipment: Continuous while in Use (IEC 60601-1)
24
Polycarbonate
Polyethylene terephthalate, nylon 6
Get other manuals https://www.bkmanuals.com
Cover
Rating nameplate
Wristband

Advertisement

Table of Contents
loading

Table of Contents